Loading ...
Loading ...
Loading ...
SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have nished.
14
g. Re- Assembly: Reassemble in the reverse order,
take care to ensure all wires are reconnected in the
correct order – Please check the stirring fan functions
correctly prior to nal reassembly, taking care to
ensure safe electrical working practices.
h. Check the electrical safety of the appliance by
carrying out the appropriate electrical safety
checks, earth bond and high Voltage Hi Pot tests.
21. Remove a Door Seal
Each Door has a silicone based seal mounted to the door
inner skin. The seal is secured by (x4) clips which are locate in
the corners.
a. Gently ease the silicone seal away from one of the
long edges of the door, this action will allow access to
the corner clips.
b. Unclip the securing clip from the door and repeat for
the other 3 corners.
c. Re- Assembly: Reassemble in the reverse order, take
care to ensure that the clips are securely engaged
into the location holes.
22. Adjust a Door
a. Each door can be adjusted and the process is dened
in Section XX or as below
b. The door is misaligned
c. The bottom hinge of either oven door can be
adjusted to alter the angle of the door.
ArtNo.320-0006b -Mercury oven door hinge adjustment
d. Loosen the bottom hinge xing screws and use the
notch and a at bladed screwdriver to move the
position of the hinge to set the hinge position.
Centreline of hinge pin
ArtNo.320-0007 Oven door hinge adjustment 2
Oven door omitted for clarity
Loading ...
Loading ...
Loading ...