Loading ...
Loading ...
Loading ...
en Ventilation function "Crisp Finish"
18
4.
To confirm the change, press on the display.
a The change is applied.
11.4 Setting added microwave
Note:
Note the correct way to operate the microwave:
¡ →"Safety", Page2
¡ →"Preventing material damage", Page6
¡ →"Microwave output settings", Page11
¡ →"Cookware and accessories with microwave",
Page16
Requirement:Observe the information about the re-
spective operating mode.
→"Setting options with the microwave", Page17
1.
Press the operating mode that you require in the
menu.
2.
Select the settings for the operating mode, e.g. type
of heating and temperature.
3.
Press
"Added microwave".
4.
Use the setting ring to set the microwave output.
5.
To confirm the set microwave output, press on
the display.
6.
Press "Cooking time" and set the cooking time.
7.
Press to start the operation.
a The appliance starts to heat and the time counts
down.
a When the time has elapsed, a signal sounds. A
message appears on the display confirming that the
operation has finished.
8.
Once the cooking time has elapsed:
‒ If required, you can select other settings and re-
start the operation.
‒ When the food is ready, use
to switch the ap-
pliance off.
Changing added microwave
You can change or deactivate the added microwave at
any time.
1.
Press
on the display.
2.
Press the microwave output .
3.
Change or deactivate added microwave with the
setting ring.
4.
To confirm the change, press on the display.
a The change is applied.
12 Ventilation function "Crisp Finish"
The ventilation function "Crisp Finish"
extracts mois-
ture from the cooking compartment so that your food
will be more crispy.
Hot steam that may escape when the appliance door is
opened is reduced.
12.1 Suitable types of heating with the
ventilation function
Only certain types of heating are suitable for the ventil-
ation function.
You can use the ventilation function for the following
types of heating:
¡ 4Dhot air
¡ Top/bottom heating
¡ Circulated air grilling
¡ Pizza setting
12.2 Setting the ventilation function
You can activate the ventilation function at any time,
even after the start of the operation.
1.
Set a suitable type of heating and a temperature.
If required, you can select other settings and com-
bine with the ventilation function.
2.
Press
"Crisp Finish".
a The symbol lights up red.
3.
Press
to start the operation.
a The appliance starts heating.
a The setting values are shown on the display.
4.
When the food is ready, use
to switch the appli-
ance off.
Note:Amplified fan noises can be heard while the ap-
pliance is in operation.
Cancelling the ventilation function
You can switch off the ventilation function at any time.
1.
Press
on the display.
2.
Press "Crisp Finish".
a The symbol changes back to white.
a The operation continues without the ventilation func-
tion.
Loading ...
Loading ...
Loading ...