Loading ...
Loading ...
Loading ...
15
2. Move the fan switch to the AUTO position. The blower should stop
immediately.
Heating system
1. Move the SYSTEM switch to the HEAT position. If the auxiliary
heating system has a standing pilot, be sure to light it.
2. When the (FA)st heating cycle rate is selected in the configuration
menu, (see configuration menu item 2), the thermostat will call for heat
at 0.5ºF (0.5ºC) below set-point, and turn off at set point. When the
(SL)ow heating cycle rate is selected, the thermostat will call for heat at
1.5ºF (1.5ºC) below set-point, and turn off at set-point. When the
thermostat calls for heat, the display will show Heat On. If the Heat On
display is flashing, the compressor lockout feature is operating in the
heat pump mode. (Note: See Configuration menu item 8).
Loading ...
Loading ...
Loading ...