Loading ...
Loading ...
Loading ...
8
Technical Data
Battery Voltage* ................................. 24V D.C.
Battery Capacity ................................ 2.0 Ah
Battery Charge Time Max..................1 hr 20 mins
Battery Run Time Max ....................... 40 mins
Charger Input.....................................100 – 240 V AC,
50 – 60 Hz, 50 W
Charger Output ..................................25.2 V DC,
1400 mA
Motor .................................................65.5 W
Grinding Speed Max .........................6500 rpm
Angle Adjustment Max ......................30 degrees
left or right
Arbor ................................................. 7/8 in. (22 mm)
Grinding Wheel Diameter ..................4.25 in. (108 mm)
Grinding Wheel Thickness ................. 1/8 in. (3.2 mm)
Grinding Wheel Grit ..........................100
Grinding Wheel Material ...................Aluminum Oxide
Chain Gauge .....................................0.05 in. – 0.07 in.
(1.3 mm – 1.8 mm)
Chain Pitch .......................................1/4 in. + 3/8 in. + 0.325 in.
(6.35 mm + 9.5 mm
+ 8.3 mm)
Weight ...............................................3.74 lbs (1.7 kg)
(chain saw sharpener alone)
Weight ..............................................4.7 lbs (2.1 kg)
(chain saw sharpener with battery installed)
*Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage
under typical load is 21.6 volts.
Unpacking
Carton Contents
• Cordless chain saw sharpener
• 24V iON+ lithium-ion battery
• 24V iON+ lithium-ion battery charger
• Manuals with registration card
1. Carefully remove the cordless chain saw sharpener and
check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
chain saw sharpener. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils
or small parts. These items can be swallowed and pose a
suocation risk!
Assembly
mCAUTION! Do not install the battery before fully
assembling the unit.
mWARNING! Mount the components very carefully so
as not to impair the safety and eciency of the machine. If in
doubt, please call the Snow Joe
®
+ Sun Joe
®
customer service
center at 1-866-SNOWJOE (1-866-766-9563).
The equipment comes fully assembled. Fasten it securely
to a suitable surface (e.g., a work-bench) in a suitable place
(protected against dust, dry, well-lit) and it's ready for using.
1. Position the machine at a suitable surface. Push it onto the
surface as far as possible until the mounting stop on the
bottom prevent the machine from going any further (Fig. 1).
NOTE: It's recommended to mount the machine at chest
height for best visibility and easy operation.
2. Insert two M8 bolts into the mounting holes on both
sides (Fig. 2). Tighten to secure the machine on the
mounting surface.
Fig. 1
Mounting
surface
Mounting
stop
Fig. 2
Mounting
holes
Loading ...
Loading ...
Loading ...