Loading ...
Loading ...
2
6. Secure work – Use the chain guide lock to secure the
chain to free both hands for moving the motor head/
grinding wheel.
Chain Saw Sharpener Use and Care
1. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
2. Use the right product – Do not use this machine for any
job except that for which it is intended.
3. Check for damaged parts – Carefully check that the
product will operate properly and perform its intended
function. Replace damaged or worn parts immediately.
Never operate the product with a damaged part.
4. Safety switch – Do not use a product with a malfunctioning
switch. Any power tool that cannot be controlled with the
power switch is dangerous and must be repaired by an
authorized service representative before using.
5. Disconnect the tool – Turn o the power switch and
remove the battery when it is not in use, before servicing
it, when changing accessories and when performing any
other maintenance task.
6. Store idle tool indoors – When not in use, the cordless
chain saw sharpener should be stored indoors in a dry,
locked place out of the reach of children. Inspect the tool
prior to storage and before re-use.
7. Replacement parts – When servicing this unit, use only
identical replacement parts. Replace or repair damaged
cord immediately on the charger.
8. Use recommended accessories – Consult page 17
for recommended accessories. The use of improper
accessories could cause personal injury or property
damage. To guarantee the eciency and consistent
performance of the machine, replace any worn or broken
parts with only genuine parts from Snow Joe
®
+ Sun Joe
®
.
9. Moving parts – Keep hands and feet away from
moving parts.
10. Keep guard in place and in good working order –
Never start the machine without the grinding wheel
guard in place.
11. Maintain the cordless chain saw sharpener with care
– Follow the applicable maintenance instructions for
replacing parts and changing accessories. Lubrication is
not required.
12. Do not stand on the machine – Serious injury could
occur if the tool is tipped or if the cutting edge is
unintentionally contacted.
13. Never leave tool running unattended – Turn o and
remove the battery. Don’t leave tool until it comes to a
complete stop.
Service
mWARNING! Have your power tool serviced by a
qualied repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
1. Replace cracked wheel immediately.
2. Always use guards and eye shields.
3. Do not overtighten the grinding wheel retainer.
4. Use only retainers furnished with the chain saw sharpener.
5. Frequently clean grinding dust that accumulate under the
chain saw sharpener.
mWARNING! Risk of injury due to accidental starting. Do
not use in an area where children may be present.
Specic Safety Rules for Chain
Saw Sharpener and the Grinding
Wheel
• Use only identical replacement grinding wheel.
• Keep hands clear from grinding wheel during use. Never try
to stop the grinding wheel by your hands.
• Electric shock hazard. Do not expose to rain or use in
damp locations.
• Do not use for wet grinding.
• Not for use by or around children.
• Always keep the hand grips clean and dry.
• Switch o the machine and disconnect battery pack from
tool before making any adjustments, changing accessories,
or storing the tool. Such preventive safety measures reduce
the risk of starting the tool accidentally.
• Do not push the On/O switch any more if the protective
circuit is triggered. This may damage the battery.
• Always wear the proper personal protective equipment
including heavy-duty gloves when handling the wheel.
• Do not use a wheel that is cracked or chipped.
• Before starting the machine, make sure the grinding wheel
is correctly secured and positioned up in rest mode. Do not
overtighten the wheel mounting retainer.
• Always ensure the appropriate wheel guards are installed.
• Store out of reach of children.
Loading ...
Loading ...
Loading ...