Loading ...
Loading ...
Loading ...
Troubleshooting en
49
Fault Cause and troubleshooting
timeLight does not
light up.
timeLight deactivated in the basic settings.
▶
→"Overview of the basic settings", Page37
Energy-saving mode is active.
▶ Press any button.
a The symbol lights up again.
High spin speed not
reached.
A low spin speed is selected.
▶ The next time you run a wash cycle, set a higher
spin speed.
Unbalance load detection system is using a reduced
spin speed to eliminate an unbalance.
▶ Redistribute the laundry in the drum.
Note:Where possible, mix large and small items in
the drum. Different sized items of laundry distribute
themselves better during the spin cycle.
▶ Start the Spinprogramme.
The spin programme
does not start.
Drain pipe or water outlet hose is blocked.
▶ Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed.
▶ Ensure that the drain pipe and water drain hose are
not kinked or trapped.
The unbalanced load detection system has interrupted
the spin cycle because the laundry is unevenly distrib-
uted.
▶ Redistribute the laundry in the drum.
Note:Where possible, mix large and small items in
the drum. Different sized items of laundry distribute
themselves better during the spin cycle.
▶ Start the Spinprogramme.
Rushing, hissing
noise.
Water is flushed under pressure into the detergent
drawer.
▶ Not a fault – normal operating noise.
Loud noises during
the spin cycle.
Appliance is not correctly aligned.
▶
→"Aligning the appliance", Page21
The appliance feet are not fixed.
▶ Secure the appliance feet.
→"Aligning the appliance", Page21
Transit bolts have not been removed.
▶
→"Removing the transit bolts", Page13.
Loading ...
Loading ...
Loading ...