Loading ...
Loading ...
Loading ...
sharkclean.comsharkclean.com
USING YOUR VACUUM USING YOUR VACUUM
CONTROLS AND CLEANING MODES USING THE DOCK
Press the On/O button on the handle to turn on
power. To turn o power, press the button again.
POWER
Use the PowerFins floor nozzle for powerful cleaning
on both bare floors and carpets. The brushroll is
activated when the hand vacuum is connected and
powered on.
UPRIGHT
To detach the floor nozzle from the wand, step on
the nozzle while pressing the nozzle release button
at the bottom of the wand. Lift the wand to remove
it. To reattach the wand, align it over the neck of
the floor nozzle, then slide it on until it clicks into
place.
ABOVE-FLOOR WITH WAND
Detach the hand vacuum to clean above-floor areas.
Slide the release buttons on both sides of the handle,
and lift the hand vacuum o the wand. To attach
an accessory to the hand vacuum, slide it into the
opening in the nozzle. To remove, slide the release
buttons on both sides of the handle and slide out
the accessory.
ABOVE-FLOOR WITH HAND VACUUM
NOTE: All accessories are compatible with both the wand and the hand vacuum.
Place the vacuum on the dock in a downward
motion. Once properly attached, the auto
evacuation process will begin. The evacuation
cycle will last for 10 seconds.
WS642 Only: In its default mode, the dust cup
evacuation will happen automatically every time
the vacuum is placed onto the dock. If you would
like to turn this feature o, press the mute button
on the top side of the dock base. While the mute
icon is illuminated, the automatic empty feature
will be disabled and the dock will only charge the
unit. To turn the automatic empty feature back on,
simply press the mute button again.
Once evacuation is complete, the vacuum will
continue charging until it is removed from the dock
Note: do not remove the vacuum while the evacuation cycle is taking place.
Loading ...
Loading ...
Loading ...