Loading ...
Loading ...
Loading ...
11
ENG
Cautions
1. The ceramic hotplate must be installed by qualified personnel or technicians. We have professionals at your
service. Please never conduct the operation by yourself.
2. The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes dryer, as
the humidity may damage the hob electronics
3. The ceramic hotplate shall be installed such that better heat radiation can be ensured to enhance its reliability.
4. The wall and induced heating zone above the table surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
This hob must be connected to the mains power supply only by a suitably qualified person.
Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate
3. The power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or branching devices, as
they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its temperature will
not exceed 75˚C at any point.
AII installation work must be carried out by a competent person or qualified
electrician. Before connecting the mains supply ensure that the mains voltage
corresponds to the voltage on the rating plate inside the cooker hood.
WARNING: THIS APPLIANCE MUST BE EARTHED.
Connecting the hob to the mains power supply
Check with an electrician whether the domestic wiring system is suitable without alterations.Any alterations
must only be made by a qualified electrician.
This appliance requires a 16 Amp Miniature Circuit Breaker.
N (Blue)
L (Brown)
(Green/Yellow)
Loading ...
Loading ...
Loading ...