Loading ...
Loading ...
Loading ...
Programme chart
32
Outerwear Cold to 40°C Max. load 2.5kg
Items Performance outerwear (e.g. jackets and trousers) made from mem-
brane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®,
etc.
Tip - Zip up or close any jackets with Velcro before washing.
- Do not use fabric conditioner.
- If required, these items can also be re-proofed using the Proof-
ingprogramme. Proofing after each wash cycle is not recommen-
ded.
Proofing 40°C Max. load 2.5kg
Items Treating microfibre fabric, ski wear or table linen made from mainly
synthetic fibres to provide a finish which is resistant to water and dirt
Tip - The items must be freshly laundered and spun or dried before
proofing.
- For best results, the items should be heat-treated afterwards. This
can be achieved by drying them in the tumble dryer or ironing
them.
Drain/Spin –
Tip - Drain only: Set spin speed to.
- Make sure you select the appropriate spin speed.
Separate rinse/Starch Max. load 7.0kg
Items - Rinsing hand-washed items
- Table cloths, serviettes and workwear requiring starching
Tip - Reduce the final spin speed for fabric that creases easily.
- Laundry that is to be starched should be washed but not treated
with fabric conditioner.
- Items will be rinsed very effectively with 2rinses by activating the
Water + extra option.
Loading ...
Loading ...
Loading ...