Loading ...
Loading ...
Loading ...
K1
M
66
11
P2
22
P3 5
C
33
S6
PE
N F
2
1
3
4
P1
66
11
P2
P3 5
C
2
1
3
4
P1
1
2
4
3
55
44
33
22
33
PE
1
2
4
3
55
44
33
K14 K15
45
AA
SP
66
MA
MA
MA
MA MA
11
Models H392…, H391…
SP
AA
66
11
11
MA
MA
MA
RE
00
S5
MA MA
N F
M
11
66
P2 4
00
P1 2
00
R5
K1 K15 K16
45
§
WIRING DIAGRAMS
§ = only models with
electric barbecue
• During the warranty period repairs can only be carried out by the authorized
After-Sales Service.
• Before repairing, disconnect the appliance from the mains, ie, disconnect the power
cord or unscrew the fuse.
• Unauthorized interventions and repairs may cause electrocution or short circuit, so do
not perform them. Leave this work to authorized technicians.
• In the case of minor disturbances you can try to solve the problem by following the
instructions.
• The assistance service during the warranty is not free, if the device does not work for
incorrect use.
• The elimination of faults or complaints, which were caused by use or incorrect
installation, will not be repaired under warranty. Warranty costs will be charged to the
user.
Below you will nd some advice on rectifying some common problems.
If the problem persists despite observing the instructions above, call the authorised
after-sales service.
TROUBLESHOOTING
Troubleshooting Guide
PROBLEM
The ame is not uniform.
The ame changes suddenly.
To light the burners, keep
the ignition knob pressed for
longer.
After ignition the ame goes
out.
The grill in the burner area has
changed color.
Electrical operation is general-
ly disturbed.
The electric ignition no longer
works.
The burner lids are dirty.
POSSIBLE CAUSE
Gas regulation not suitable.
The burner parts are not posi-
tioned correctly.
The burner parts are not posi-
tioned correctly.
The knob was not pressed
long enough or was pressed
too gently.
A natural phenomenon due to
the high temperature.
Igniter or terminal block da-
maged.
Food or detergent residues
between the ignition electrode
and the burner.
Normal dirt.
ELIMINATION
The gas regulation must be
controlled by an expert
Position the burner parts
correctly.
Position the burner parts
correctly.
Keep the knob pressed longer,
before releasing it, press
strongly.
Clean the grill with metal clea-
ning detergent.
Check the ignition and / or the
terminal block and replace it if
it is damaged.
Clean carefully between the
ignition electrode and the
burner.
Clean the lids with metal clea-
ning detergent.
INSTALLATION
40 41
Loading ...
Loading ...
Loading ...