Snow Joe 24V-X2-SB22 OPERATOR’S MANUAL

Loading ...

8. Some parts of the snow blower may freeze under extreme

temperature conditions. Do not attempt to operate the

snow blower with frozen parts. If the parts freeze while the

snow blower is in use, stop the snow blower, remove the

batteries, and inspect for frozen parts. Free all parts before

restarting or operating the snow blower.

Never force controls that have frozen.

9. When working on pebbles, gravel, or unpaved surfaces,

avoid throwing loose surface material along with the snow

by pushing down on the handle to raise the scraper at the

base of the unit above the pebbles or gravel.

Headlights

The snow blower is equipped with two headlights that can be

used to illuminate the forward path in the dark. The headlights

will be turned on once the machine is started by depressing

the safety switch button and pulling the ON/OFF trigger

(Fig. 21).

NOTE: The lights will only turn ON when the snow blower is

running. The lights will automatically turn o 30 seconds after

the machine powers o.

Changing Throw Direction and

Throw Height

1. The discharge chute can be adjusted 180 degrees by

rotating the chute crank. Rotate the chute control crank

clockwise to move the discharge chute to the left and

counterclockwise to move the chute to the right (Fig. 22).

2. The chute deector on the top of the discharge chute

controls the height of the snow stream. Loosen the knobs

to raise or lower the deector to the desired height of

snow you wish to throw. Tighten the knobs to secure the

deector (Fig. 23).

Maintenance

To order genuine replacement parts or accessories for the

Snow Joe

24V-X2-SB22 cordless snow blower, please visit

snowjoe.com or contact the Snow Joe

+ Sun Joe

customer

service center at 1-866-SNOWJOE (1-866-766-9563).

mWARNING! Make sure to turn o the switch and

remove the batteries before performing any maintenance task

on your snow blower.

Lifetime Lubrication (Motor + Auger)

Lubrication is not necessary and may damage the unit.

The snow blower is lubricated for lifetime use at the factory

before shipment.

General Maintenance Tips

1. Do not attempt to repair the machine unless you have the

proper tools and instructions for disassembly and repair of

the machine.

m WARNING m

Never direct the snow discharge chute at the

operator, at bystanders, at vehicles, or at nearby

windows. The discharged snow and foreign objects

accidentally picked up by the snow thrower can

cause serious damage and personal injury.

Always orient the discharge chute in the opposite

direction from where you, bystanders, surrounding

vehicles, or windows are located.

Fig. 22

Chute crank

Discharge chute

Deector

knob

Fig. 23

m WARNING m

Makesurethatthechutedeectorsnapsandlocks

completely onto the discharge chute. An opening

betweenthedischargechuteandthechutedeector

may allow foreign objects to be picked up by the

snow thrower and thrown in the direction of the

operator causing serious bodily injury.

• Donotadvancethechutedeectortoofar

forward causing an opening to appear between

the deectoranddischargechute.

• Do not overtighten the knobs on the chute

deector.

Loading ...

Snow Joe 24V-X2-SB22 48-Volt MAX IONMAX Cordless Single-Stage Snow Blower Kit 22-Inch Brushless 1600W Motor

OPERATOR’S MANUAL - Page 13