Loading ...
Loading ...
Loading ...
11
Chute Crank Assembly
1. Remove the hitch pin from the female end of the lower
chute crank (Fig. 12).
2. Install the lower crank rod by inserting it into the opening
at the back of the housing and aligning the holes (Fig. 13).
3. Secure the lower chute crank in place with the hitch pin
(Fig. 14).
4. Remove the other hitch pin from the lower chute crank
(Fig. 15).
5. Slide the upper chute crank through the rubber ring
located on the middle frame (Fig. 16).
6. Slide the upper chute crank into the lower chute crank
(Fig. 17).
Fig. 12
Hitch Pin
Lower chute crank
(female end)
Fig. 16
Rubber ring
Upper chute crank
Fig. 13
Align the
holes
Lower chute
crank
Lower chute
crank
Fig. 15
Hitch pin
Fig. 17
Lower chute crank
Upper chute crank
Fig. 11
Clips
Middle frame
Chute clean-out tool
Fig. 14
Hitch pin
Loading ...
Loading ...
Loading ...