Loading ...
Loading ...
Loading ...
Time-setting options en
17
9.5 After using steam operation
Dry the appliance after each steam operation.
Note:Traces of limescale may remain in the cooking
compartment after operation with steam. The functional-
ity of the appliance is not affected by this. You can re-
move traces of limescale using hot water or a cloth
soaked in vinegar. Observe the information on clean-
ing.
→"Cleaning and servicing", Page26
Emptying the water tank
WARNING‒Risk of burns!
The water tank may heat up while the appliance is in
operation.
▶ Wait until the water tank has cooled down from the
previous operation.
▶ Remove the water tank from the tank recess.
ATTENTION!
Drying the water tank in the hot cooking compartment
leads to damage to the water tank.
▶ Do not dry the water tank in the hot cooking com-
partment.
Cleaning the water tank in the dishwasher will damage
it.
▶ Do not clean the water tank in the dishwasher.
▶ Clean the water tank with a soft cloth and standard
washing-up liquid.
1.
Use
to open the control panel.
2.
Remove the water tank.
3.
Carefully remove the lid of the water tank.
4.
Empty the water tank, clean it with detergent and
then rinse it thoroughly with clean water.
5.
Dry all parts with a soft cloth.
6.
Rub the seal on the lid until dry.
7.
Leave the water tank to dry with the lid open.
8.
Place the lid on the water tank and push down on it.
9.
Insert the water tank and close the control panel.
Drying the cooking compartment
Dry the cooking compartment after each steam opera-
tion.
▶
Dry the cooking compartment by hand or use the
drying function.
→"Drying", Page30
10 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
Time-setting
option
Use
Timer You can set the timer to run inde-
pendently of the appliance during op-
eration. The timer does not affect the
appliance.
Cooking
time
Once the set duration has elapsed,
the appliance stops heating automat-
ically.
Ready at Along with the duration, you can set
the time at which you want the oper-
ation to end. The appliance starts up
automatically so that the operation
finishes at the required time.
10.1 Timer
You can set the timer regardless of whether the appli-
ance is on or off.
Setting the timer
1.
Press
.
2.
Press .
3.
Press Hours, Minutes or Seconds.
4.
Swipe left or right to select the required timer dura-
tion.
5.
Press to confirm the setting.
a appears on the display. The timer duration counts
down.
a Once the timer duration has elapsed, an audible sig-
nal sounds.
6.
Press any button to end the audible signal.
Changing the timer
1.
Press
.
2.
Press .
3.
Press Hours, Minutes or Seconds.
4.
Swipe left or right to change the timer duration.
5.
Press to confirm the setting.
Cancelling the timer
1.
Press
.
2.
Press .
3.
Press to reset the timer duration.
4.
Press to close the timer.
10.2 Cooking time
Once the set duration has elapsed, the appliance stops
heating automatically. You can only use the cooking
time in conjunction with a type of heating.
Setting the cooking time
1.
Set a type of heating and a temperature.
2.
Press "Cooking time".
3.
Swipe left or right to select the duration.
4.
Press
to confirm the setting.
5.
Press to start operation with a cooking time.
a The cooking time appears on the display. The cook-
ing time counts down.
a When the time has elapsed, a signal sounds.
6.
Press any button to end the audible signal.
Changing the cooking time
1.
Press
.
2.
Press "Cooking time".
3.
Swipe left or right to change the duration.
4.
Press to confirm the setting.
Cancelling the cooking time
1.
Press .
Loading ...
Loading ...
Loading ...