Loading ...
Loading ...
Loading ...
BATTERIES
The screwdriver is equipped with 3 nickel-cadmium
rechargeable batteries. Length of service from each
charging will depend on the type of work you are doing.
The batteries in this tool have been designed to provide
maximum trouble free life. However, like all batteries, they
will eventually wear out. To remove and dispose batteries,
follow BATTERY REMOVAL instructions. Handling of
these batteries, especially when wearing rings and jewelry,
could result in a serious burn.
To obtain the longest possible battery life, we suggest the
following:
• Remove the tool from the charger once it is fully
charged and ready for use.
For battery pack storage longer than 30 days:
• Store the battery pack where the temperature is below
80°F.
• Store battery packs in a "discharged" condition.
COVER
!
SCREW(S)
BATTERIES
BATTERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
See Figure 11.
TO REMOVE:
• Remove the three screws securing motor housing
cover then remove cover.
• Lift batteries from motor housing enough to expose
leads and battery terminals. Disconnect leads from
battery terminals. NOTE: Be careful not to break
battery leads when disconnecting leads.
_1i - 0d/&\/
__ _J&%'/
,822_
To preserve natural resources, please
recycle or dispose of batteries
properly.
This product contains nickel-cadmium
batteries. Local, state or federal
laws may prohibit disposal of nickel-
cadmium batteries in ordinary trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
A
WARNING: Upon removal, cover the battery pack's
terminals with heavy-duty adhesive tape. Do not
attempt to destroy or disassemble battery pack or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
BATTERY
LEAD
MOTOR
HOUSING
BATTERY
LEAD
Fig. 11
14
Loading ...
Loading ...