Loading ...
Loading ...
Loading ...
!
EN
17
Thi
s button allows you to choose between
two different options, depending on the
selected programme.
- RA
PID
The
button becomes active when
you select the RAPID (14/30/44 Min.)
programme on the knob and allows you to
select one of three durations indicated.
- STA
IN LEVEL button
!
On
ce the programme has been selected
the wash time set for that programme will
be automatically shown.
! Thi
s option allows you to choose between
3 levels of wash intensity modifying the
length of the programme, depending on
how much the fabrics are soiled (can only
be used on some programmes as shown
in the table of programmes).
!
Thi
s button allows you to change the
temperature of the wash cycles.
!
It
is not possible to raise the temperature
over the maximum allowed for the
programme, in order to protect the
fabrics.
!
If
you want carry out a cold wash all the
indicators must be off.
!
By
pressing this button, it is possible to
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
! If
the label does not indicate specific
information, it is possible to use the
maximum spin expected in the program.
!
To
reactivate the spin cycle press the
button until you reach the spin speed you
would like to set.
!
It
is possible to modify the spin speed
without pausing the machine.
! Pr
essing simultaneously the buttons
TEMPERATURE SELECTION and SPIN
SPEED for about 3 seconds, the
machine allows you to lock the keys. In
this way, you can avoid making
accidental or unwanted changes if a
button on the display is pressed
accidently during a cycle.
! The
key lock can be simply cancelled by
pressing the two buttons simultaneously
again or turning off the appliance.
RA
PID / STAIN LEVEL button
TE
MPERATURE SELECTION
button
SPI
N SPEED button
To
prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
An
over dosing of detergent can
cause excessive foaming. If the
appliance detects the presence of
excessive foam, it may exclude the
spinning phase or extend the duration
of the program and increase water
consumption.
Th
e machine is fitted with a special
electronic device, which prevents the
spin cycle should the load be
unbalanced. This reduces the noise
and vibration in the machine and so
prolongs the life of your machine.
KE
Y LOCK
Loading ...
Loading ...
Loading ...