Loading ...
Loading ...
Loading ...
!
EN
13
4. MAI
NTENANCE AND
CLEANING
To
clean the washing machine exterior, use
a damp cloth, avoiding abrasives, alcohol
and/or solvents. To maintain a good wash
performance we recommend that the soap
drawer and pump filters are regularly
cleaned. A monthly service wash, using a
proprietary cleaner is also recommended.
!
We
recommend you clean the drawer to
avoid accumulating detergent and
additive residue.
!
To
do this, extract the drawer using slight
force, clean it with running water and
reinsert it in its housing.
!
En
sure the siphon cap is correctly
refitted.
!
The
washing machine comes with a
special filter able to trap large residue,
such as buttons or coins, which could
clog the drain.
!
On
ly available on certain models: pull out
the corrugated hose, remove the stopper
and drain the water into a container.
!
En
sure all the water has been emptied
from the drum.
!
Be
fore unscrewing the filter, we
recommend you place an absorbent cloth
under it to keep the floor dry. A small
amount of water will come out of the filter
as you remove it - this is normal.
!
Tur
n the filter counter-clockwise to the
limit stop.
!
Re
move and clean the filter; when
finished, replace it turning it clockwise.
The filter handle will be locked when it is
not possible to turn any further and the
handle is horizontal. Smearing a small
amount of liquid soap on the filter seal will
help refitting.
!
Re
peat the previous steps in reverse
order to reassemble all parts.
!
Sh
ould the washing machine be stored in
an unheated room for a long period of
time, drain all water from tubes.
!
Un
plug the washing machine.
!
De
tach the tube from the drainage
system and clip on the rear of the
machine and lower it, fully draining water
into a bowl.
!
Se
cure the drain tube with the drainage
system and clip on the rear of the
machine when finished.
!
Ke
ep the door glass and gasket clean.
Drawer cleaning
Fi
lter cleaning
Su
ggestions for moves or
pr
olonged disuse
Th
e manufacturers warranty only
covers faults within the product of a
mechanical or electrical nature.
Faults caused by handling,
installation or miss use are not
covered and may incur a charge for
any repair visit to resolve.
Loading ...
Loading ...
Loading ...