Loading ...
Loading ...
Loading ...
8
Advanced Warning System (AWS) – Causes for Detection Alarm Activation
1. Improper connection causing a reverse polarity condition. If your Truck PAC
is connected improperly, such that a reverse polarity condition exists, the
AWS Detection Buzzer will sound immediately upon completing the connection
to the vehicle.
2.
Improper Truck PAC Voltage Selection when connected to a 24 Volt Vehicle. If
your Truck PAC is connected to a 24 Volt vehicle and you turn the Truck PAC
Voltage Selector Switch to 12 Volt mode, the AWS Detection Buzzer will sound.
3. Connecting to a completely drained battery while there is still a load on the
vehicle’s electrical system.
If this condition occurs, remove the load that is on
the vehicle’s electrical system (headlights, dome light, radio, etc.) and set the
Truck PAC’s Voltage Selector Switch to match vehicle’s voltage.
Used as an Alternative Power Supply for Vehicles - In 12V Mode Only
Your Truck PAC is an essential tool for all who replace automobile batteries.
Most vehicles have electronic components with memory, such as alarm systems,
computers, radios, phones, etc. and when the vehicle’s battery is replaced, the
memory is lost. However, if the Male-Male extension cord is plugged from the Truck
PAC to the 12 Volt outlet on the vehicle, the memories can be saved.
Note: To use the Truck PAC for this purpose, the chosen outlet must be live when the
vehicle is turned OFF. On some vehicles, 12 Volt outlets are deactivated when the
vehicle is turned OFF.
Used as a Multipurpose Power Supply
Your Truck PAC is also a portable power source for all 12VDC accessories equipped
with a male 12 Volt plug. The DC outlet on the Truck PAC has automatic overload
protection.
When your Truck PAC is used with a DC to AC power inverter, it can operate
appliances normally powered by 120 Vac or 220 Vac. Recommended inverter for the
portable power source is 300 watts maximum. For more information, contact your
nearest Truck PAC dealer.
Loading ...
Loading ...
Loading ...