Loading ...
Loading ...
Loading ...
4
OPERATION AND MAINTENANCE
Portable Power Source Features
The Truck PAC provides plenty of power for starting vehicles – more than enough to
start most cars, vans, SUVs, light trucks and delivery vehicles.
The Truck PAC will power most 12VDC accessories equipped with a male 12 Volt
outlet plug. The DC outlet features automatic overload protection.
The unit features a test switch and LED lights. State of the art circuitry allows the unit
to remain continuously connected to the charger without the risk of overcharging.
Safety Features
The Truck PAC ES1224 features our exclusive AWS - Advanced Warning System
TM
enhancement to alert the operator to unsafe jump starting conditions. For more
information regarding AWS, please see the Operating Instructions section of this
manual.
Safety storage holsters prevent accidental sparking of clamps and rotate 90° for easy
clamp removal and replacement. Always re-wrap cables and properly secure clamps
in holsters after each use.
The Truck PAC contains the latest technology with its 12 Volt sealed, non-spillable
battery and may be stored in any position.
Recharging Procedures
Note: Upon initial purchase, your Truck PAC should be charged for a minimum of 24
hours.
Figure 2. Test Button, Charging, Power Levels and Charge Complete LEDs
There are two ways to charge your Truck PAC. The recommended method is
automatic charging using the supplied wall charger. An alternative method is through
the DC power outlet using the provided 12 Volt Male-Male Extension Cord. This
second method is not automatic and must be monitored because the Truck PAC could
be damaged due to overcharging, plus the Voltage Selector Switch must be in the 12V
position when using this charging method.
Loading ...
Loading ...
Loading ...