Loading ...
Loading ...
3
Thank you for purchasing a Mounteld lawnmower. This machine will give you many years of safe and
reliable service if operated in accordance with these instructions. Please read and understand these
Operating Instructions before using your mower. Failure to do so could result in personal injury
or damage to the equipment.
NEVER TIP THE MOWER ON ITS SIDE AS THIS WILL FLOOD THE AIR FILTER WITH OIL.
To access the underside, lift the front wheels by lowering the handle until it rests on the ground.
SAFETY PRECAUTIONS
Your lawnmower should be used with due care and attention. Symbols have therefore been placed on various parts of
the machine to remind you of the main precautions to be taken. Their meaning is explained below. You are also asked
to carefully read the safety regulations in the applicable chapter of this handbook
1. Warning: Read the instruction manual before operating the machine.
2. Warning! Do not put hands or feet inside the compartment of the cutting
blade. Remove the spark plug cap and read the instructions before carrying
out any maintenance or repair work.
3. Danger! Risk of thrown objects. Keep all persons away from the work area
whilst working.
DESCRIPTION OF SYMBOLS ON CONTROLS (where foreseen)
11. Engine stop 12. Drive on
IMPORTANT Any damaged or illegible decals must be replaced. Order replacement decals from a Mounteld
Authorised Service Dealer.
Maximum noise and vibration levels
Operator’s ear noise pressure level ................................................ db(A) 83
- Measurement uncertainty ............................................................ db(A) 1,46
______________________________________________________________
Measured acoustic output level...................................................... db(A) 96
- Measurement uncertainty ............................................................ db(A) 0,61
______________________________________________________________
Guaranteed acoustic output level ................................................... db(A) 96
______________________________________________________________
Vibration level ................................................................................ m/s 5,9
- Measurement uncertainty ........................................................... m/s 1,82
Loading ...
Loading ...
Loading ...