Loading ...
Loading ...
Loading ...
13
GRASS CUTTING
IMPORTANT When working, always keep a safe distance from the cutting blade, given by the length of the handle.
For mulching or rear grass discharge: always avoid removing a large quantity of
grass. Never cut more than one third of the total grass height per single pass.
Emptying the grass catcher
While working with the cutting blade running, the indicator remains raised for as long as the grass catcher is able to
hold cut grass; when it lowers, it means that the grass catcher is full and must be emptied.
Up = empty
Down = full
To remove and empty the grass catcher:
1. Release the engine / cutting blade brake lever (Figure 15.A).
2. Wait until the cutting blade stops.
3. Lift the rear discharge guard (Figure 15.B).
4. Grasp the handle (Figure 15.C) and remove the grass catcher keeping it in an erect position (Figure 15.D).
MAINTENANCE
Stop the engine and disconnect the spark plug lead before working on the machine.
DO NOT TIP THE MOWER ONTO ITS SIDE AS THIS WILL FLOOD THE AIR FILTER WITH OIL.
To access the underside of the machine, lift the front wheels by lowering the handle until it rests on the ground.
CUTTER BLADE
Examine the cutter blade regularly for wear or damage.
• A slightly worn blade can be re-sharpened by your local authorised Mounteld dealer
• If the blade is damaged it should be replaced. Replacement blade kits are available from your Mounteld stockist.
If in doubt refer to your authorised Mounteld dealer, or telephone 0800 121 6585 or
1800 806 149 ROI
.
A
D
B
C
Figure 15
Loading ...
Loading ...
Loading ...