Loading ...
Loading ...
Loading ...
11
Once the time has elapsed
Once the time has elapsed, a beep will sound.
‹‹ and Uare
displayed in the time program function display. After pressing
the
0 symbol, the indications turn off.
Changing or cancelling the time
Press the
0 symbol, the U indicator lights up.
Change the time using the 1 to 9 symbols or press 0 to cancel.
Cleaning protection
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning protection
function.
Press the
>D symbol. The control panel is locked for
approximately 35 seconds.
The surface of the control panel can now be cleaned without
risk of changing the settings.
After the time has elapsed, a warning beep will sound and after
a few seconds the function is deactivated. The control panel
lock has been deactivated.
Note: The cleaning protection function does not include the
>D symbol or the main switch. The hotplate may be switched
off when required.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
”and ‰
flash alternately.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Basic settings
The device has several basic settings. These settings may be
adapted to the needs of the user.
Indicator Function
™‚
Childproof lock
‹ Off.*
‚ On.
™ƒ
Beeps
‹ Most signals deactivated.
‚ Some beeps deactivated.
ƒ All beeps activated.*
™†
Automatic timer
‹ Switched off.*
‚-ŠŠ Automatic shut-off time
™‡
Duration of the time program function warning signal
‚ 10 seconds*.
ƒ 30 seconds.
„ 1 minute.
™ˆ
Power-Management function
‹ = Deactivated.*
‚ = 1,000 W minimum power.
‚. = 1,500 W.
ƒ = 2,000 W.
etc.
Š or Š. = maximum power of the hob.
*Factory settings
Loading ...
Loading ...
Loading ...