Klein 602-7-INS Tools Flathead Screwdriver, 5/16-Inch Cabinet Tip, Insulated, 7-Inch Shank

User Manual - Page 3

For 602-7-INS.

PDF File Manual, 36 pages, Read Online | Download pdf file

602-7-INS photo
Loading ...
Loading ...
Dwg Name: BAT20-CW-1390355ART Dwg No: 1390355
ECO No: 033619 Pkg Dwg Ref: 1290522 Rev: A
Color Reference: N/A
3
ENGLISH
DEFINITIONS
The definitions below describe the level of severity for each signal word:
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not
avoided, may result in property damage.
WARNINGS
DO NOT use under wet conditions or in presence of flammable liquids or gases.
This impact wrench is a professional power tool. DO NOT let children come into
contact with the tool. Supervision is required when inexperienced operators use
this tool.
Never modify the power tool or any part of it. Damage or personal injury could result.
SAFETY
2) Electrical Safety:
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground fault
circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of
electric shock.
3) Personal Safety:
a) Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools
that have the switch on invites accidents.
d)
Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
SAFETY
To ensure safe operation and service of the wrench, follow these instructions. Failure
to observe these warnings can result in electric shock, re, severe injury or death.
1) Work Area Safety:
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
BAT20CW-1390355ART.indd 3 10/9/19 3:02 PM
Loading ...
Loading ...
Loading ...