Loading ...
Loading ...
Loading ...
6
Connections and setup
Refer to your TV’s Quick Start Guide or other provided documentation for model-
specific information about attaching the base or a wall mount and making
connections to AC power and to your other audio/video devices.
Before initial setup
Protect against power surges
• Connect all components before you plug any power cords into the wall outlet or
power strip.
• NEVER plug your TCL Roku TV into an outlet that is controlled by a wall switch.
• Turn off the TV before you connect or disconnect any cables.
• Make sure all antennas and cables are properly grounded. Refer to the Important
Safety Instructions.
Safety information
• Prevent TV from overheating by placing in an area with good ventilation.
• Do not block ventilation holes on the TV. Position the TV so air can circulate freely
on all sides.
• Do not stack objects on the TV.
• If you place the TV on a stand, make sure you allow adequate ventilation.
• If you connect an audio receiver or amplifier to the TV, place it on the top shelf so
the heated air will not overheat the TV.
Avoid audio interference
• Position cables properly; insert each cable firmly into the designated jack.
• Route all cables down one side of the back of the TV instead of straight down the
middle.
• If your antenna uses 300-ohm twin lead cables, do not coil the cables.
• Keep twin lead cables away from audio/video cables.
Loading ...
Loading ...
Loading ...