Yamaha DM3-D User Manual

Loading ...

Setting the send levels from output channels (MIX, STEREO)

to MATRIX

This explains how to set send levels from MIX/STEREO channels to the MATRIX BUS.

1 Open the SEND FROM screen for MATRIX channels.

2 Touch the ON button for the MIX and/or STEREO channels to turn them ON (default

setting is ON).

3 Use the Pre button to switch whether to send before or after the fader.

4 Drag the SEND LEVEL sliders to adjust send levels from the MIX and/or STEREO

channels.

5 If the MATRIX BUS is set to stereo, adjust the pan with SEND PAN sliders.

NOTE

(

Left and right channel send levels can be adjusted independently for channels set to stereo, such as MIX and STEREO

channels.

(

If the MATRIX BUS is set to stereo, the SEND PAN sliders on channels set to stereo, such as MIX and STEREO channels,

become BAL (balance) sliders.

(

The MATRIX BUS can be switched between stereo and mono via the BUS SETUP screen on the SETUP screen.

Yamaha DM3-D Digital Mixing Console with Dante