Yamaha DM3-D User Manual

Loading ...

Configuring channel links

This explains how to link particular parameters of the input channels.

1 Touch the Ch Link button on the SETUP screen to open the CH LINK screen.

2 While pressing the [SEL] key of the link source of the input channel, press the [SEL]

key of the link destination to link the channel.

The channel to link can also be selected from the INPUT CH jump button.

3 Use the buttons in the LINK PARAMETER field on the CH LINK screen to select the

parameter(s) (more than one can be selected) to link.

4 If the FX ON, MIX ON or MTRX ON buttons were turned ON in step 3, use the buttons

in the SEND PARAMETER field to specify the desired bus (more than one can be

selected).

NOTE

(

You can also open the CH LINK screen by pressing and releasing 2 or more [SEL] keys of channels to be linked at the same time.

(

When a [SEL] key of a channel that belongs to a link group is pressed and lit, all the channel [SEL] keys included in the same link

group then flash.

(

If INPUT channels are linked to ST IN/FX RTN channels, parameters that do not exist on the ST IN/FX RTN channels are ignored.

Yamaha DM3-D Digital Mixing Console with Dante