Loading ...
Loading ...
Loading ...
Channel-specific screens
Adjusting EQ in manual mode
This explains how to operate the EQ in manual mode.
1 Open the EQ screen.
2 Touch the EQ button to turn it ON.
3 Touch the 1-knob mode button to turn it OFF.
4 Scroll the EQ parameters on the touch screen to adjust the EQ.
NOTE
(
When an EQ parameter is highlighted, it can be adjusted with the [TOUCH AND TURN] knob. When doing so, each time
you touch the EQ parameter, it toggles between its gain (G) and frequency (F). You can also switch between them by
touching the value of G and F to right of the 1-knob button.
(
To adjust Q, pinch in or out on the touchscreen, or touch the value of Q to the right of the 1-knob button and then use
the [TOUCH AND TURN] knob to adjust the setting.
(
You can select the type of filter for an EQ parameter, depending on the band. The type of filter that can be selected varies
with the channel.
(
L: Bell, low-shelving, HPF (high-pass filter)
(
LM, HM: Bell
(
H: Bell, high-shelving, LPF (low-pass filter)
5 Turn HPF ON as needed.
When using a vocals mike, you can reduce low-frequency noise by turning the HPF ON.
270
Operating Screens > Channel-specific screens
Loading ...
Loading ...
Loading ...