Loading ...
Loading ...
Loading ...
A
4aA
,Step-1
1
Sliding Weight Post Cable assembly instruction Step-
A.) Attach one end of the 138” Sliding Weight Post Cable (#102) to the triangular bracket on the
Sliding Weight post (#14). Secure it with one M10 x 1” Allen Bolt (#69), two Ø ¾” Washers (#66),
and one M10 Aircraft Nut (#86).
B.) Draw the Cable upward to the Pulley on top of the Rear Upper Frame (#9).
C.) Draw the Cable around the Pulley then downward. Attach a Small Pulley (#103) to a Double
Floating Pulley Bracket (#18). Secure it with one M10 x 1 ¾” Allen Bolt (#69), two Ø ¾” Washers
(#66), and one M10 Aircraft Nut (#86).
D.) Draw the Cable around the Pulley then upward to the Triple Floating Pulley Bracket (#96).
E.) Attach a Small Pulley (#103) to open Bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#69), two
Ø ¾” Washers (#66), and one M10 Aircraft Nut (#86). Draw the Cable around the Pulley then
downward to the open bracket one the Pulley Support Frame (#97).
F.) Attach a Small Pulley to the open bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#69), two Ø
¾” Washers (#66), and one M10 Aircraft Nut (#86). Draw the Cable around the Pulley and upward.
G.) Connect the Cable to a Short Chain (#63) with a C-clip (#61). Connect the Short Chain to the
Single Floating Pulley Bracket (#19). Secure the Chain to the bracket with one M10 x 1” Allen Bolt
(#68) and one M10 Aircraft Nut (#86).
H.) After completing the entire cable installations, come back to this Short Chain to adjust the tension
of the Cable System by adjusting the length of the Chain with the C-clip.
4
©IMPEX INC.
16
www.marcypro.com
Loading ...
Loading ...
Loading ...