Loading ...
Loading ...
Loading ...
TO CONVERT TO BAGGING OR
DISCHARGING
Simply remove mulcher plate and store in
a safe place. Your mower is now ready for
discharging or installation of optional
grass catcher accessory.
NOTE; It is not necessary to change
blades. The mulcher blades are designed
for discharging and bagging also.
Weld Nut From Hook Points
Down
The Top ,,_
Lock
Weld Washer
Screw
Latch Latch
Hook
Washer
Mulcher "_I-- Screw
Plate
Deflector
Shield
Nut
Lock Washer
Washer
Latch
Hooks
_/ CHECKLIS T
PLEASE REVIEW THE FOLLOWING
CHECKLIST:
_" All assembly instructions have been
completed.
v" No remaining loose parts in carton.
Battery is properly prepared and
charged. (Minimum I hour at 6 amps).
v' Seat is adjusted comfortably and
tightened securely°
v' All tires are properly inflated. (For
shipping purposes, the tires were
overinflated at the factory).
Be sure mower deck is properly leveled
side-to-side/front-to-rear for best
cutting results. (Tires must be properly
inflated for leveling).
v' Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers.
v" Check wiring. See that all connections
are still secure and wires are properly
clamped.
v' Before driving tractor, be sure free-
wheel control is in drive position.
WHILE LEARNING HOW TO USE YOUR
TRACTOR, PAY EXTRA ATTENTION TO
THE FOLLOWING IMPORTANT ITEMS:
#" Engine oil is at proper level.
J' Fuel tank is filled with fresh, clean,
regular unleaded gasoline.
,/ Become familiar with all controls - their
location and function. Operate them
before you start the engine,
,/ Be sure brake system is in safe operat-
ing condition_
,/ It is important to purge the transmis-
sion before operating your tractor for
the first time. Follow proper starting
and transmission purging instructions
(See "TO START ENGINE" and
"PURGE TRANSMISSION" in the Op-
eration section of this manual).
10
Loading ...
Loading ...
Loading ...