Loading ...
Loading ...
Loading ...
User's Manual
70
Figure 4-72 External light
Step 2 Configure parameters.
Table 4-43 Illuminator parameter description
Parameter Description
F1/2/3/4/5/6/7
Select the light type connected to each port.
The light type must be the same as the actual connected
light type. Otherwise, the light might be damaged.
Flashing Light
Working Mode
●
No Flash
: The light is normally off.
●
Always Flash
: The light is normally on.
●
Auto Flash
: Configure the preset value of brightness.
If the ambient brightness is lower, the light
automatically turns on; if higher, the light
automatically turns off.
Scene Mode
Select the scene mode for the flashing light from
Morning/Dusk
,
Day
and
Night
, indicating different
brightness of the light which suits the environment the
best.
Pulse Width
Configure the pulse width of flashing light. The higher
the value, the brighter the light.
Delay Time
Configure the delay time of the light to keep the
snapshot in sync with the flash.
Trigger Mode
You can select the level that triggers the flashing light.
Currently, only
Low level
is supported.
Ambient
Brightness
When setting
Working Mode
to
Auto Flash
, you need to
set the brightness prevalue.
Strobe
Output Mode Same as
Work Mode
of flashing light.
Frequency Set the frequency of the strobe.
Step 3 Click
Save
.
Loading ...
Loading ...
Loading ...