Loading ...
Loading ...
Loading ...
User's Manual
14
4.4.1.2 Configuring General Information
Set the parameters of the radar and the lanes.
Procedure
Step 1 Select
Radar
>
Radar Settings
.
The information of the connected radar is displayed on the top of the page, and you can
adjust the
Sensitivity
.
Under general situations, we recommend you leave the sensitivity as default to avoid false
detections brought by higher sensitivity.
Step 2 In the
Road Info
section, set the lane width and direction based on the actual site.
Figure 4-8 Lane information
Step 3 In the
Installation Info
section, set the installation information of the Camera.
Table 4-7 Installation information description
Parameter Description
Radar Height The installation height of the Camera.
Angle Correction
Adjust the installation angle of the radar. Make sure the angle is the
same as that in the
Visualized Data
section. For details, see "4.4.2
Configuring Visualized Data".
Horizontal Offset
Adjust the horizontal offset of the radar. Make sure the value is the
same as that in the
Visualized Data
section.
Step 4 In the
Speed Correction
section, set the speed range and the speed correction value of
the Camera.
Step 5 Click
OK
.
4.4.2 Configuring Visualized Data
See the effect of your configurations on radar detection in real time. You can also adjust some of the
radar parameters and view the changes.
Loading ...
Loading ...
Loading ...