RCF F 24XR OWNER MANUAL

Loading ...

[1] MIC INPUTS

RCF F 24XR provides 18 mono Mic inputs via XLR connectors. The Balanced XLR Microphone preamp input supports sources with a gain range from 0 dB

to -50 dB (see section [11] of this manual). All the F 24XR’s MIC-LINE inputs are supplied with an 80 Hz Hi-pass ﬁlter. Enable the 80 Hz High-Pass ﬁlter

when using voice microphone to reduce low frequency pop, bump and rumble noises (see section [11] of this manual). +48 V Phantom Power is provided

for the Mic inputs 1 to 8 and 9 to 16 with separated switches. Enable the Phantom power in presence of Condenser and Electret Microphones or in the

event of D.I. box usage (see section [10] of this manual).

[2] LINE INPUTS

Line inputs TRS jack from 1 to 16 support line signals with a gain of +20 dB to -30 dB (see section [11] of this manual).

[3] LINE INPUT 6

Line Input 6 adds the selectable Hi-Z input feature. The Hi-Z input is very useful when connecting low

level musical instruments like Electric or Acoustic Guitars or Bass Guitars with passive pick-up.

[4] STEREO INPUTS 17/18 AND 19/20

TRS jacks 17/18 and 19/20 provide stereo inputs for line sources. Note that MONO sources can be

connected to jack inputs 17 and 19 (see section [12] of this manual).

[5] STEREO INPUTS 21/22 AND 23/24

RCA and TRS jacks 21/22 and 23/24 provide stereo inputs for line sources. Note that MONO sources

can be connected to jack inputs 21 and 23 (see section [13] of this manual).

[6] FOOTSWITCH

This TS jack connector allows the use of MOMENTARY switches or foot pedals to MUTE and UN-MUTE

the audio coming from the internal FX return. When the FX is muted via footswitch the red LED near the

MUTE button of FX RET fader lights up (see the section [33] of this manual). In this state, the effect can

be unmuted both by pressing the FX MUTE button or the FOOTSWITCH again.

[7] PHONES OUTPUT

Connect headphones here to listen to the MAIN MIX or PFL signals. To avoid hearing loss set the

PHONES LEVEL control [26] to minimum (-∞) before connection, then wear headphones.

[8] MAIN OUTPUTS

These XLR male connectors provide +4 dB balanced audio output coming from MAIN MIX. Connect

your main speaker system to XLRs, named L and R. The audio level of MAIN MIX OUT L and R is

controlled by the dedicated MAIN MIX fader (see section [35] of this manual). L and R XLR MAIN MIX

outputs are replicated with L and R TRS jack.

[9] CTRL ROOM OUTPUT

Connect to Control Room Output jacks a pair of studio monitors as a local listening system.The audio

level of the CTRL ROOM output is controlled by the dedicated CONTROL ROOM potentiometer on the

front panel (see section [24] of this manual).

FRONT PANEL FUNCTIONS

ENGLISH

21/22

23/24

Loading ...

RCF F 24XR 24-CHANNEL MIXING CONSOLE WITH MULTI-FX & RECORDING

OWNER MANUAL - Page 7