Loading ...
Loading ...
Loading ...
10
[25] AUX3 PRE/POST BUTTON
This button allows selection of the AUX3 position, pre-fader or post-fader. See section [21] of this
manual.
[26] PHONES LEVEL
This knob controls the level of the PHONES OUTPUT [7]. To avoid hearing loss set the PHONES LEVEL
control to minimum (-∞) before connecting and wearing headphones.
[27] MONITOR SECTION
The MONITOR SECTION provides two “TO CTRL ROOM” buttons: the upper one select the audio path
to listen on speakers connected to CTRL ROOM OUTPUT; L/R audio path, when in upper position or
BUSSES audio path, when pressed. The lower one determines which pair of BUSSES to be listen: BUS
1/2 when in upper position or BUS 3/4 when pressed.
[28] PAN
These controls allow positioning of the signal present in the mono channel in the stereo image of the MAIN MIX.
[29] PAN/BAL
The control works as PAN when the channel is used in MONO configuration (XLR MIC INPUT) defining
the position of the signal into the stereo image of the stereo MAIN MIX. BAL (Balance) control allows
balancing of the position of the stereo channel (TRS jack line stereo input) into the stereo image of
the MAIN MIX.
[30] BAL
These controls characteristic of stereo channels allow balancing of the position of a stereo channel into
the stereo image of the MAIN MIX.
[31] MONO CHANNELS FADERS SECTION
This section allows the level of the MONO input channels from 1 to 16 to be controlled, and their routing to the output. Each one of the faders has several
control buttons. MUTE button when pressed inhibits the signal to flow to the output bus or main mix paths. The PFL button allows listening to the signal
present on the channel through speakers connected to the CTRL ROOM OUTPUT (see section [9] of this manual) or through headphones connected to
PHONES OUTPUT (see section [7]). MAIN and BUS 1/2 and BUS 3/4 buttons positioned on the right side of each fader allow the signal to be routed
respectively to MAIN MIX and/or STEREO BUS 1/2 and /or STEREO BUS 3/4.
[32] STEREO CHANNELS FADER SECTION
This section allows the level of the STEREO input channels from 17/18 to 23/24 to be controlled, and
their routing to the output. Each one of the faders has several control buttons. MUTE button when
pressed inhibits the signal to flow to the output bus or main mix paths. The PFL button allows listening
to the signal present on the channel through speakers connected to the CTRL ROOM OUTPUT (see
section [9] of this manual) or through headphones connected to PHONES OUTPUT (see section [7]).
MAIN and BUS 1/2 and BUS 3/4 buttons positioned on the right side of each fader allow the signal to
be routed respectively to MAIN MIX and/or STEREO BUS 1/2 and /or STEREO BUS 3/4.
FRONT PANEL FUNCTIONS
ENGLISH
Loading ...
Loading ...
Loading ...