Loading ...
Loading ...
Loading ...
Device label
Status LEDs
LED Activity Status
Solid blue (for 5 seconds after turning on) The device is turned on.
Alternating red and blue (for 5 seconds after turning on) The battery is low.
Off The device is in active mode.
Slow flashing blue The device is in standby mode.
Solid red (after holding the power button) The device is turned off.
Rapid flashing red (connected to a power source) The device is charging in energy-saving mode.
Solid blue and flashing red (connected to a power source) The device is charging.
Solid red (connected to a power source) Charging is complete.
Slow flashing red A software update is in progress.
Charging the Device
WARNING
This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage
caused by battery exposure to extreme heat, store the device out of direct sunlight.
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or
connecting to a computer.
The device is powered by a built-in lithium-ion battery that you can charge using a standard wall outlet or a USB
port on your computer.
NOTE: The device will not charge when outside the approved temperature range (Specifications, page 11).
1 Pull up the weather cap from the USB port.
2 Plug the small end of the USB cable into the USB port on the device.
3 Plug the large end of the USB cable into an external power source, such as an AC adapter or a USB port on
your computer.
4 Charge the device completely.
TIP: You can turn off the device to charge it faster.
Introduction 3
Loading ...
Loading ...
Loading ...