Loading ...
Loading ...
Loading ...
— 16 —
Metal bracket
Socket
Lightbulb
2 Entryway
for bulb
Prongs
Socket
Bulb with
prongs
This range hood uses halogen bulbs:
20 W 120 V Type MR16 GU10
Maintenance
Removing old lightbulbs
u
Make sure the range hood is unplugged or turn OFF
breaker.
v
Remove lters. Reach into interior of range hood
and place one hand above the metal bracket and
with two ngers gently push down on the socket
area. (See Figure #6).
CAUTION: BULB MAY BE HOT, PLEASE TAKE
OUT THE BULB WHEN THE BULB IS
COMPLETELY COOL!
Note: Range hood and Lightbulbs may have very sharp
edges; please wear protective gloves if it is necessary
to remove any parts for installing, cleaning or servicing.
w
So as not to accidently break the glass, gently
place two ngers from second hand onto the
surface of the light bulb. (See Figure #6) Gently turn
the lightbulb counterclockwise to loosen and unlock
lightbulb from socket. Once unlocked the lightbulb
should come out freely.
Installing new lightbulbs
u
With your new lightbulb in one hand, ensure the
bulb prongs are lined up with the wide ends of the
two slots located in the socket.
v
Slip light bulb into the wide ends of the two slots
and turn clockwise until a locked position is
apparent. (See Figure #7)
Note: Do not push too hard as the light bulb prongs may
break off.
w
Turn ON electrical breaker and range hood to test
for operation.
Replacing the Light Bulbs
IMPORTANT:
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY AT THE MAIN PANEL BEFORE CARRYING OUT ANY OPERATION
ON THE APPLIANCE.
Figure #6 Figure #7
Cleaning Filters
IMPORTANT: Drain oil from spacers, lters, oil tunnels, oil containers before oil and residue overow!
• Remove all spacers, lters, grease tray, and oil containers and discard oil and residue.
• Wash with warm soapy water. NOTE: Stainless steel lters, spacers and oil tunnel are top rack dishwasher safe.
• Dry thoroughly before replacing and follow directions for installation in reverse.
• Filters should be cleaned after every 30 hours of use.
• Should lters wear out due to age and prolonged use, replace with a new lter.
Loading ...
Loading ...
Loading ...