Ancona AN-1323 User Manual

Loading ...

— 15 —

Troubleshooting

Problem Possible Cause

If the range hood or halogen light

does not operate after installation:

Check if the range hood has been plugged in, make sure that

all power has been turned back ON, fused not blown and all

electrical wiring is properly connected.

The range hood vibrates when the

blower is on:

The range hood might not have been secured properly on to the

ceiling or wall.

The blower or fan seems weak: Checkthattheductsizedusedisatleast6in.(15.3cm)or

3-1/4 × 10 in. (8.3 × 25.4 cm). Range hood WILL NOT function

efcientlywithinsufcientductsize.Forexample:7in.(17.7cm)

duct over 6 in. (15.3 cm) hole and loosely secured.

Checkifductiscloggedorifdamperunit(half-circularange)is

not installed correctly or opening properly. A tight mesh on a side

wallcapunitmightalsocauserestrictiontotheairow.

The lights work but the fan is not

spinning at all, is stuck or is rattling:

The fan might be jammed or scraping the bottom due to

shipping damage. Please contact us immediately.

The hood is not venting out

properly:

Make sure the distance between the stove top and the bottom of

the hood is within 24 in. and 30 in. (61 and 76.2 cm) distance.

Reduce the number of elbows and length of duct work. Check if

all joints are properly connected, sealed, and taped.

Loading ...

Ancona AN-1323 36 in. Insert B336D 420 CFM Ducted Range Hood