Loading ...
Loading ...
Loading ...
The continuous shooting speed is slow.
High-speed continuous shooting may be slower depending on the battery level, ambient
temperature, flicker reduction, shutter speed, aperture value, subject conditions,
brightness, AF operation, type of lens, use of flash, shooting settings, and other
conditions. For details, see Selecting the Drive Mode, or see File size/number of shots
available and Maximum burst for still photos.
The maximum burst during continuous shooting is lower.
Shooting intricate subjects such as fields of grass may result in larger file sizes, and the
actual maximum burst may be lower than the guidelines in File size/number of shots
available and Maximum burst for still photos.
Even after I change the card, the maximum burst displayed for
continuous shooting does not change.
Estimated maximum burst indicated in the viewfinder does not change when you switch
cards, even if you switch to a high-speed card. Maximum burst in File size/number of
shots available and Maximum burst for still photos is based on standard Canon test
cards, and the actual maximum burst is higher for cards with faster writing speeds. For
this reason, estimated maximum burst may differ from actual maximum burst.
Some image quality options are not available with cropped shooting.
/ / / image quality options are not available when [1.6x (crop)] is set,
or with RF-S/EF-S lenses.
High-speed display is not available during high-speed continuous
shooting.
Refer to the high-speed display requirements in High-Speed Display.
The aspect ratio cannot be set.
Aspect ratios cannot be set for RF-S or EF-S lenses ([1.6x (crop)] is set automatically).
Aspect ratios cannot be set when [ : Add cropping information] is set to an option
other than [Disable].
ISO 100 cannot be set for still photo shooting.
The minimum speed in the ISO speed range is ISO 200 when [ : Highlight tone
priority] is set to [Enable] or [Enhanced].
885
Loading ...
Loading ...
Loading ...