Loading ...
Loading ...
Loading ...
Manual Setting
Check on the screen for image areas affected by light sources that flicker at high
frequencies, then find a suitable shutter speed.
1.
Select [Manual setting].
2.
Adjust the shutter speed.
Do the following if banding is not eliminated at the shutter speed set
with automatic detection.
• Turn the < > dial. With the < > dial, you can increase the
shutter speed set with automatic detection (2×, 3×, 4×, and so on)
or decrease it (1/2×, 1/3×, 1/4×, and so on).
• Turn the < > dial to fine-tune the setting.
If this does not eliminate banding, rotate the camera about 90° or
switch to automatic detection in other ways.
3.
Take the picture.
199
Loading ...
Loading ...
Loading ...