Loading ...
Loading ...
Loading ...
29
PROCEDURE
The setting parameters according to the list on pages 27 are shown on the display as follows:
on the top row of the display the relevant parameter is shown, for example P 2014,
on the bottom row the set value of the parameter is shown.
1 Go to programming mode. See page 26.
2 Browse to the relevant parameter by pressing the ARROW UP or ARROW DOWN key
repeatedly. If you go too far, simply continue browsing until the display shows the correct
parameter.
3 When the display shows the correct parameter, for example
”P 2012”, press OK to confi rm.
The row now fl ashes with the set value of the parameter.
4 Increase or reduce the value using the ARROW UP or ARROW DOWN key.
5 To save the set value, press OK.
6 To return to operating mode, press DOWN ARROW and then STOP.
RESTORING TO FACTORY SETTING
1 Go to programming mode as described on page 26.
2
Hold down the UP ARROW and DOWN ARROW keys simultaneously and press OK.
The factory settings are saved and the display shows the last run programme.
Loading ...
Loading ...
Loading ...