Loading ...
Loading ...
Loading ...
19
ELECTRICAL CONNECTION
___________________________________
The drying cabinet should be connected to
an earthed wall socket using the connecting
cable supplied and must not be permanently
wired.
___________________________________
___________________________________
The socket should be located so that the
plug can be easily pulled out if necessary.
___________________________________
___________________________________
Check that the supply current matches the
data on the rating plate and that the mains
lead is earthed correctly according to current
standard. We recommend that the power
cord be fitted with a residual current de-
vice (RCD).
___________________________________
___________________________________
The drying cabinet must be connected to a
dedicated circuit.
______________________________________
______________________________________
Do not connect the drying cabinet to the
power supply with an extension lead as the
necessary safety cannot be guaranteed (risk
of overheating).
______________________________________
___________________________________
The manufacturer disclaims all liability if the
electrical connection has not been carried
out in the way described in this use and
care manual.
______________________________________
The drying cabinet is connected to a 230 V single-phase 50-60 Hz and protectively earthed
wall socket.
Fuse 10 A.
The drying cabinet is supplied ready for connection with a cable and an earthed plug.
____________________________
CAUTION
A damaged connecting cable may only
be replaced with a special connecting
cable of the same type (can be ordered
from Asko’s spare parts department). For
safety reasons, the replacement may be
carried out only by a qualified electrician
or by Asko Service.
___________________________________
Loading ...
Loading ...
Loading ...