Loading ...
Loading ...
Loading ...
- 6 -
components frequently cleaned, inspected, and lubricated.
Note: If the equipment is stored outdoors, be sure to lubricate all parts
before and after use to ensure the equipment stays in good working
condition.
ASSEMBLY INSTRUCTIONS
1. Attach crossbeam(13) and
rear support axle
(10) to main post (9) with
bolt (11),
washer(14),
spring washer (15)and
Nut(16).
2. Attach
brake wheels
(21) to
anterior support axle
(20) with washer (17),
spring washer (18) and nut (19).Cover the end cover(23)at last.
3. Attach
anterior support axle
(20) to crossbeam(13)with bolt (11), washer
(14), spring washer (15) and nut (16).
4. Attach
mounting arms
(7) to
head assembly
(6) with bolt (8), washer (5),
spring washer (4) and nut (3).
5. Insert the head assembly (6) into the hole of the main post (9). Line up
the hole in the head assembly (6) and the main post (9), and assembly
them by inserting the lock pin (2).
6. Insert the handle assembly(6) into the hole of the
head assembly
(6).
7. Tight all the screws.
ASSEMBLY DIAGRAM
Item
Name
Qty.
Item
Name
Qty.
1
Handle
1
13
Crossbeam
1
2
Lock pin
1
14
Washer M10
6
3
Nut M14
4
15
Spring Washer M10
6
4
Spring Washer M14
4
16
Nut M10
6
5
Washer M14
4
17
Washer M12
2
6
Head Assembly
1
18
Spring Washer M12
2
7
Mounting Arms
4
19
Nut M12
2
8
Hex Head Bolt M14x60mm
4
20
Anterior Support Axle
1
9
Main Post
1
21
Brake Wheels
1
10
Rear Support Axle
1
22
No Brake Wheels
1
11
Hex Head Bolt M10x70mm
6
23
End Cover
2
12
Wheel
2
Loading ...
Loading ...
Loading ...