Loading ...
Loading ...
Loading ...
- 5 -
equipment. Test the equipment without a load. If the binding continues,
refer to the after sale parts and service. If your equipment binds while
under a load, use equipment with equal or larger load capacity to lower the
load safely to the ground.
Cleaning
If the moving parts of the equipment are obstructed, use cleaning solvent
or another good degreaser to clean the equipment. Remove any existing
rust, with a penetrating lubricant.
Do not use motor oil to lubricate the equipment
Rust Prevention:
- Check daily for any signs of rust or corrosion. Without a load check for
signs of rust that are visible and clean as needed.
Storing the Equipment
1. Store in a dry location, recommended indoors.
2. Equipment should be stored in an area where they will not be subjected
to damage.
3. If extreme temperatures or chemically active or abrasive environments
are involved, the guidance provided in shall be
followed.
4. Temperature - When equipment are to be used at temperatures above
140"F (60"C) or below -20"F (-29"C), the
equipment manufacturer or a qualified person should be consulted.
5. Chemically Active Environments -The strength and operation of
equipment can be affected by chemically active environments such as
caustic or acid substances or fumes. The equipment manufacturer or a
qualified person should be consulted before equipment are used in
chemically active environments.
6. Other Environments - The internal workings of equipment can be
affected by high moisture, gravel or sand, silt, grit, or other dust-laden air.
Equipment subject to these environments should have their inner
Loading ...
Loading ...
Loading ...