Solid State Logic 726570X2 User Guide

Loading ...

Get-Started

SSL UF1 User Guide

Keyboard Identify (Mac Only)

One of the special features of UF1 is its ability to trigger keyboard command sequences of your favourite DAW shortcuts. These

are assigned using the SSL 360° software and this is covered later in this User Guide.

When you ﬁrst plug in your UF1, Mac OS will present the above 'Keyboard

Setup Assistant' window because Mac OS wants you to identfy which region

(Europe, America or Japan) this, as yet unidentiﬁed, keyboard is from. If

you connected your UF1 to your computer before installing SSL 360°

software, you need to close this setup assistant because SSL 360°

needs to be installed on your computer in order to continue through this

setup process. To make the Keyboard Setup Assistant appear again once

SSL 360° is installed, do the following: Open up Mac's 'System Preferences'

> Go to 'Keyboard' > Click 'Change Keyboard Type' (please note, your UF1

must be connected to your computer via a USB cable) and click 'Continue'.

• When presented with 'Identifying Your Keyboard' and you are being asked to 'Press the key immediately to the right of the

Shift Key', at this point, press and hold the 360° key on UF1 and press the MacKeyID button on the top-right soft key of UF1.

• This will move you through to the ﬁnal step of the process, where you can choose the appropriate option (Europe, America or

Japan) for your region and then click 'Done'.

STEP 1: Go to System Preferences and

click 'Keyboard'.

STEP 4: When presented with the message 'Press the key immediately to the right of

the Shift Key', press and hold the 360° key on UF1 and then press MacKeyID.

STEP 5: Select your region and click

'Done'.

STEP 2: Click 'Change Keyboard Type' STEP 3: Click 'Continue'.

Loading ...

Solid State Logic 726570X2 UF1 Single-Fader DAW Control Surface