Solid State Logic 726570X2 User Guide

Loading ...

Pyramix Tutorial

111

SSL UF1 User Guide

Channel Encoder

Pressing down on the CHANNEL encoder, the large LCD will change to display the available CHANNEL encoder modes. Turn

the encoder to highlight the desired mode and press down again to select the mode.

< >

By default, the CHANNEL encoder is used to move your DAW tracks across the UF1 surface, in increments of one channel at a

time.

Fader Sel

Allows you to change the number of the track within the current controller bank that UF1 is focused on.

UF1 defaults to the ﬁrst channel (i.e. fader '1') within the bank and this is shown in the top corner of the

UF1 small display. You may need to change this to access tracks at the end of the mixer, when the bank

of 8 faders UF1 is controlling butts up against the end of the session.

Focus

Emulates the scroll function of a mouse. This can be a really nice way of controlling plug-ins or anything

else on screen that responds to a mouse scroll operation. Simply open a plug-in GUI, hover your

computer mouse over a control and turn the encoder for hands-on control.

Volume

The CHANNEL encoder controls the system volume level, if the audio device you are using can be controlled by the operating

system's volume up/down. For example, if you're on the road with your headphones plugged into the computer's built-in audio

output.

Loading ...

Solid State Logic 726570X2 UF1 Single-Fader DAW Control Surface