Loading ...
Loading ...
Loading ...
mio X-Series User Guide Page 15
• Powering Off: To power off the mioXL, press and hold the Power Button (for 4 to 5
seconds) until the OLED display and all LEDs are turned off, then immediately release
the Power Button.
• Entering Bootloader Mode: Bootloader Mode can only be manually entered from the
Power Off state. First verify that the mioX is powered off and then press and hold the
Power Button down (for 4 to 5 seconds) as the unit cycles the eight LEDs through green
then red colors. After all LEDs are off, immediately release the Power Button. Bootloader
Mode is then indicated by a blank display and alternately flashing green DIN-MIDI and
USB-MIDI LEDs.
Top Row Controls
The four top row LEDs of the Touch Panel illuminate whenever there is activity on each type of
I/O port:
• USB-DAW (USB MIDI between mioX and your computer)
• RTP-MIDI (RTP/Network MIDI)
• DIN-MIDI (MIDI on DIN Ports)
• USB-MIDI (MIDI on USB Host Ports)
When the mioX transmits data to another device, the corresponding LED will light up green.
When the mioX receives data from another device, the corresponding LED will light up red.
For example: When mioX receives USB MIDI from a connected computer, the USB-DAW
LED will light red. When mioX transmits MIDI data out any of the DIN-MIDI
ports, the DIN-MIDI LED will light green.
The top row LEDs are also touch-sensitive controls that select screens for monitoring MIDI
activity. Each type of port has a page that displays activity on all ports simultaneously. All MIDI
monitor pages appear and operate in a similar fashion; take DIN-MIDI for example:
The upper line of dots indicates activity on DIN In ports 1 through 8. The lower line of dots
indicates DIN Out ports 1 through 12. In this example, the two brighter dots indicate DIN-MIDI
activity present on IN 2 and OUT 3.
Loading ...
Loading ...
Loading ...