Loading ...
Loading ...
Loading ...
diono.comCambria® 2
22 23
4. Fasten vehicle seat belt across child.
The lap portion of the seat belt
should rest within both lower belt
guides. Make sure the vehicle seat
belt is not twisted and lays flat
across child’s lap, torso and shoulder.
5. Tighten the seat belt by pulling
the diagonal shoulder belt portion
in the direction of the arrows.
6. Confirm seat belt buckle is in
correct position – it should align
with the
RED belt path guides on
head support and side of seat.
IMPORTANT:
DO NOT position
the vehicle shoulder
belt over the
armrest. It MUST
pass through the
lower belt guide.
IMPORTANT: The vehicle shoulder belt MUST route
completely through the shoulder belt guide and not fall
o the child’s shoulder.
IMPORTANT: The vehicle shoulder belt should lay over
the shoulder and should NOT be touching the child’s neck.
WARNING! Use ONLY the lap and shoulder belt
system when restraining the child in this booster seat.
DO NOT use lap belt only.
1. Properly position child into
installed seat. The child should
be sitting upright and seated all
the way back in the booster seat.
2. Adjust head support to proper
height: The shoulder belt guide should be slightly
above the child’s shoulders (at least 1 cm). Squeeze
the head support adjustment lever on the back of the
booster seat while adjusting it’s height up or down to
fit the child.
3. Feed the diagonal portion of the
vehicle seat belt through the
shoulder belt guide.
1
5
6
4
click
SECURING THE CHILD
1cm
2
3
SECURING THE CHILD
Loading ...
Loading ...
Loading ...