Blackmagic Design HYPERD/ST/DFHP User Manual

Loading ...

Timecode Settings

Input

There are five timecode input options available when recording.

Video Input Selecting video input will take the embedded timecode from SDI and HDMI sources

with SMPTE RP 188 metadata. This will maintain sync between your SDI orHDMI

source and the file recorded on the HyperDeck Studio.

External Click this option when using the timecode in connection on the rear panel.

Internal Use this option to record time of day timecode via the built in timecode generator.

Last Clip

Regen

By selecting ‘last clip regen’ for your timecode input, each file will start one frame

after the last frame of the previous clip. For example, if your first clip ends on

10:28:30:10, the next clip timecode will start at 10:28:30:11.

Preset If you want to set a timecode manually, select the preset option. Recorded clips

will start at the timecode set via the preset later in the manual.

Drop Frame

For NTSC sources at frame rates of 29.97 or 59.94, you can select ‘drop frame’ or ‘non-drop

frame’ timecode. If the source is unknown, select ‘default’. This will maintain the standard of the

input, or default to drop frame if there is no valid timecode.

Preset

You can set your time code manually by pressing the set button and entering the start time

code using the search dial and set button. Make sure the ‘preset’ option is selected under the

input menu.

Output

Select your timecode options for your outputs.

Timeline To output a continuous timecode for all clips recorded on a card or drive,

selecttimeline.

Clip Selecting the clip option will output the time code of each individual clip.

SDI Output

23Settings

Loading ...

Blackmagic Design HYPERD/ST/DFHP HyperDeck Studio HD Pro