Loading ...
Loading ...
Loading ...
4
5.
Make sure that the outdoor unit is not
covered with snow or ice. If covered,
remove it by using hot water
(approximately ).
If the water temperature is higher than
, it will cause damage to
plastic parts.
1.
2.
3.
There exists a time lag between the actual
angle of the louver and the liquid crystal
indication.
When the " " switch is pressed, the
louver will not stop immediately. The louver
will move one extra swing at the next.
Discharge air angle is fixed at horizontal
position during start-up of heating operation
and defrosting operation. When the outlet air
temperature reaches higher than approximately
30°C, swinging of louvers is started.
4. During the defrosting operation, fan stops
running.
Loading ...
Loading ...
Loading ...