Loading ...
Loading ...
Loading ...
21
10.3 Setting the Filter Indication Interval
The FILTER indication interval on the remote control switch can be set at every 100,
1,200 or 2,500 hours (factory setting: 1200 hours). If 100, 1,200 or 2,500 hours' interval
is required, follow the instructions below.
FILTER Indication Interval
Approx.
100 hr.
Approx.
Approx.
1,200
hr.
Approx.
2,500 hr.
No.
Indication
b4 01
b4 00(*)
b4 02
b4
03
b4
04
(*): Standard
(1)Press and hold
" "
(menu) and
" "
(return)
simultaneously for at least 3 seconds during the normal
mode (when unit is not operated).The test run menu will
be displayed.
4
1
4
1
(2) Select " Optional Setting " from the test run
menu pressing " ".
" and (3)Select the indoor unit by pressing "
press " ".
(This screen is NOT displayed when the number of
indoor unit connected with the remote control switch
is 1(one). In this case, (4) will be displayed.)
(4) Press " " and select the item.
(5) Press " " and change the setting.
(6) Press " " so that the confirmation screen will be
displayed.
(7) Select " Yes " and press " ". The test run menu will
be displayed after the setting is confirmed. If " NO" is
pressed, the screen will return to (4).
(8) Press " " (return) on the test run menu to return
to the normal mode.
To set other units, press " " (return) at (4) (5) so that the
screen will return to (3). ( If the number of indoor unit
connected with the remote control switch is 1 (one), the
screen will return to (1).)
1,200 hr.
Loading ...
Loading ...
Loading ...