Loading ...
Loading ...
Loading ...
23
www.insigniaproducts.com
8 Cu. Ft. Electric and Gas Dryers
INSTALLATION INSTRUCTIONS
Bottom venting
1 Remove the two rear exhaust retaining screws, then pull out the exhaust duct.
2 Press the tabs on the knockout, then carefully remove the knockout for the
desired vent opening.
3 Push the adapter duct onto the blower housing of your dryer.
4 Connect a 4 in. (10.2 cm) elbow to the 4 in. (10.2cm) duct section, and secure
all joints with duct tape. Make sure that the male end of the elbow faces down
through the hole in the bottom from your dryer.
SIDE VIEW
1 1/2 in. (3.8 cm)
TOP VIEW
4 3/4 in. (12.1 cm)
3 3/4 in. (9.3 cm)
12 in.
(30.5 cm)
Retaining screw
Rear exhaust duct
DRYER SIDE/BACK VIEW
Adapter duct
Knockout
Blower housing
Loading ...
Loading ...
Loading ...