Loading ...
Loading ...
Loading ...
12 INSTALLATION
2 Remove and save the foam block for future
use.
• If the pedestal washer must be moved in
the future, the foam block will help prevent
damage to the pedestal washer during
transportation.
• To prevent damage, do not remove the
foam block until the pedestal washer is at
the final location.
3 Turn the top cover about 180 degrees, cover
the opening in the top with the top cover and
install 4 short sheet metal screws.
Stacking the Front-Loading Washer
on the Pedestal Washer
1 Place the front-loading washer on top of the
pedestal washer.
• Place the leveling feet of the front-loading
washer inside the bracket openings on the
pedestal washer, and align the bracket
screw holes.
2 Securely attach the two washers at the
corners using screws.
• First, insert screws on each side. Then insert
screws on the front and back side.
NOTE
• It can be difficult to assemble if it is not
assembled in the proper order, or if the pedestal
washer has not been leveled prior to placing the
front-loading washer on top.
3 Turn the feet of the front-loading washer
slightly until they are firmly snug up against
the pedestal washer. Loosen the adjustable
feet by turning them clockwise for a half turn
with a wrench. Then tighten the four lock
nuts. All lock nuts must be tightened.
NOTE
• The pedestal washer will not work as a
standalone unit.
Connecting the Water Inlet
Hoses
To avoid the risk of costly water damage, purchase
and install new water inlet hoses when installing
the washer.
WARNING
• Do not overtighten the hoses or cross-thread the
hose fittings. Overtightening or cross-threading
can damage the valves or couplings, resulting in
leaking and property damage.
• Do not reuse old hoses. Use only new hoses
when installing the washer. Old hoses could leak
or burst causing flooding and property damage.
Contact an LG Customer Information Center for
assistance in buying hoses.
NOTE
• Periodically check the hoses for cracks, leaks,
and wear, and replace the hoses every five years.
Loading ...
Loading ...
Loading ...